Paving stones, also known as stepping stones or pavers, are a practical and aesthetically pleasing technique to control traffic over lush grass areas. You can install pavers to direct visitors to your lawn in a certain direction and prevent individuals from stepping on your grass. Thus, you can showcase your garden without worrying about your grass getting damaged. So, how do you install pavers on grass? This blog covers a step-by-step process for installing pavers. So, read on to find out.
How Do You Install Pavers on Grass?
1. Determine the Layout
Start by creating a layout for where you want to install the pavers. You can do this by directly placing the pavers in your garden. You can also create visually appealing patterns while laying out the path.
2. Test the Layout
Next, walk normally from one stone to the next to test the layout. Ensure the stones are equidistant, and you don’t have to take too big or too little steps while moving forward. Repeatedly walk the path, making minor alterations as required.
3. Trim the Stone’s Outer Boundary
You will require safety goggles and gloves for this step. Start by taking a sharp garden knife and inserting it into the turf around the pavers. Cut or saw through the turf as you trace around the stone. You can also use a long-handled half-moon edger for this purpose.
4. Remove the Turf
The next step is to remove the turf down to the soil. While doing this, ensure that the root bundles under the grass are exposed. This turf should only be used to fill in bare patches in your lawn.
5. Compress the Soil
Using your hands or a tamping instrument, compress the exposed soil. The ground underneath the paving stone must be compact. When you pound on the ground with your fist, ensure the soil is sufficiently packed without making a significant impression.
6. Adding the Sand
Fill the hole with a sand layer or paver’s sand that is one inch deep. Using a handmade screed, a tiny plank you can move around within the hole to even the material, you can level the sand.
7. Place the Stone
Next, place the paver on the sand –use a garden trowel to “fix” the stone in the sand by tapping the top of the stone. Ensure you have evenly balanced the stone in place. Three-quarters of an inch should be left between the ground and the paver’s top surface. Remove the stone and add more sand under it if it is too low. Whereas, if it’s too high, try compressing it further.
8. Fill the Gaps Between the Pavers
Lastly, using loose soil or sand, fill in the gaps between the pavers. You can also plant creeping plants like thymes in the bare space. Keep the area moist until they begin to grow actively.
Final Word
If you want to get pavers installed by professionals, Platinum Pavers can help. They are experts in walkway, driveway, and patio deck paver installations. You can get their paver installation services in Fort Myers and the entire Southwest Florida area. Click here to contact them!
